13.56 MHz

Nano Reader Module Mifare®

Elatec’s nano reader module is designed for integration into machines, handheld computer or any other device. The focus has especially been set on size, price and flexibility.

Thanks to its compact dimensions, integration directly on a PC board is possible.

Unique features are:  4 (four) user configurable ports (to be configured as input or output), beeper support and different sleep modes for lowest power consumption. The simple proprietary ASCII protocol enables quick software development cycles. All host communication is done via RS-232 interface.

Download PDF

Multi ISO OEM Module

The HF Multi ISO OEM Module is a contact less proximity read/write device that supports various ISO14443 A&B, ISO15693, ISO 18000-3 and EPC RFID devices, including the whole MIFARE® family. The module needs an external application specific antenna to operate.

Download PDF

Mini Reader/Writer Module AXA020MF for 13,56MHz Mifare transponder

The AXA020MF contactless card Read/Write module comes with an internal antenna and are suitable for embedded applications and general Electronic Devices. The AXA020MF is user friendly and can be controlled by command from a UART (serial port). Functions are selected by a Pin jumper allowing full control of all functions.

Download PDF

TWN3 Multi OEM Board

The TWN3 reader family supports 125 kHz and 13.56 MHz: HID PROX, HID iCLASS, INDALA, 125kHz Multitags (EM410x, HITAG-1, HITAG-2, HITAG-S, EM4150, T5567, Q5), MIFARE (Ultralight, 1k, 4k, DESFire) and LEGIC (advant und prime).

The TWN3 Reader is available as OEM-board and as desk reader in housing (USB or RS232 connection). The compact sized device is equipped with 2 LEDs and a loudspeaker. Operating mode can be keyboard emulation (simply plug into your computer, no drivers are necessary) or a virtual comport with full access to the transponder.

Download PDF

CF card reader Multi-ISO for 13.56MHz Transponder

The Multi ISO CF Card Module is a highly integrated contact less short range read write device that supports the whole MIFARE® family, ISO14443A, ISO14443B, ISO 15693, ISO 18000-3 and EPC RFID devices. The module has a built in antenna.

Download PDF

TWN3 Multi reader

The TWN3 reader family supports 125 kHz and 13.56 MHz: HID PROX, HID iCLASS, INDALA, 125kHz Multitags (EM410x, HITAG-1, HITAG-2, HITAG-S, EM4150, T5567, Q5), MIFARE (Ultralight, 1k, 4k, DESFire) and LEGIC (advant und prime).

The TWN3 Reader is available as OEM-board and as desk reader in housing (USB or RS232 connection). The compact sized device is equipped with 2 LEDs and a loudspeaker. Operating mode can be keyboard emulation (simply plug into your computer, no drivers are necessary) or a virtual comport with full access to the transponder.

The reader can be customized by an individual label (inlay).

Download PDF