Reader IC
The EM4095 reader IC is a CMOS integrated transceiver circuit intended for use in a 125 kHz RFID basestation.
125 kHz
Nano reader module 5 Volt
Nanomodule TTL is a transponder reader core modul for 125 KHz transponder. Very small dimensions to integrate into machines or handheld computers. Maximum reading distance depends on shape of antenna and transponder up to 15cm. Reads and writes to many different types of transponders
Nano reader module 3,3 Volt
The 3.3V version of Elatec’s Nanomodule TTL is a transponder reader core module for 125 KHz transponder. Very small dimensions to integrate into machines or handheld computers. Maximum reading distance depends on shape of antenna and transponder up to 15cm. Reads and writes to many different types of transponders including HITAG-S krypto mode.
Mini Reader Module AXA012
The Mini Reader Module AXA012 is a fully integrated low cost LF-reader for 125 kHz at minimized dimensions. Equipped with an internal antenna it can easily integrated into machines or handheld computers. For read only transponders
Multireader plug&play board for 125KHz Transponder
The AXA020MF contactless card Read/Write module comes with an internal antenna and are suitable for embedded applications and general Electronic Devices. The AXA020MF is user friendly and can be controlled by command from a UART (serial port). Functions are selected by a Pin jumper allowing full control of all functions.
Multireader plug&play board ferrite for 125KHz Transponder
The AXA020MF contactless card Read/Write module comes with an internal antenna and are suitable for embedded applications and general Electronic Devices. The AXA020MF is user friendly and can be controlled by command from a UART (serial port). Functions are selected by a Pin jumper allowing full control of all functions.
TWN3 Multi OEM Board
The TWN3 reader family supports HID (Prox, iCLASS), MIFARE® (1k, 4k, DESfire®, Mini, Ultralight), LEGIC® advant and LEGIC® prime and 125 kHz Multitags (EM-Series, HITAG™-Series, Atmel®-Series).
The TWN3 Reader is available as OEM-board and as desk reader in housing (USB or RS232 connection). The compact sized device is equipped with 2 LEDs and a loudspeaker. Operating mode can be keyboard emulation (simply plug into your computer, no drivers are necessary) or a virtual comport with full access to the transponder.
The reader can be customized by an individual label (inlay).
Handheldreader RS232 or USB for 125KHz Transponder
The hand reader is designed for connection to any terminal. It comes in a compact housing with helix cable and is easy to connect and provides an easy to implement protocol. RS232 or USB versions are available
CF card reader for 125KHz Transponder
Elatec´s CF Card Reader is a integrated reader for 125KHz transponders. It combines state of the art technology in a small housing. Antenna is completely integrated. Rapid application development drivers for Windows and Windows CE are provided with the module. Read and write access to nearly all 125KHz transponders.
Long range reader DSR100 for 125KHz Transponder
Elatec´s long range reader DSR-100 is an integrated compact reader for 125 kHz transponders. It combines state of the art technology (DSP, Synchronic Demodulation...) in a small housing. Reading distance of up to 2m (depending on size of tag and orientation) integrated in a robust housing demonstrate the conception to heavy industrial applications. Available with RS232 or USB interface.
Antenna for long range reader DSR100 for 125KHz Transponder
This antenna is especially made for operation together with a DSR100 long range reader. It consists of a parallel resonant circuit, which is pre-tuned to the nominal operating frequency of 125 kHz. The IP class 67 and a wide temperature range guarantees operation also under heavy duty conditions. other formats are available on request.
TWN3 Multi reader
The TWN3 reader family supports HID (Prox, iCLASS), MIFARE® (1k, 4k, DESfire®, Mini, Ultralight), LEGIC® advant and LEGIC® prime and 125 kHz Multitags (EM-Series, HITAG™-Series, Atmel®-Series).
The TWN3 Reader is available as OEM-board and as desk reader in housing (USB or RS232 connection). The compact sized device is equipped with 2 LEDs and a loudspeaker. Operating mode can be keyboard emulation (simply plug into your computer, no drivers are necessary) or a virtual comport with full access to the transponder.
The reader can be customized by an individual label (inlay).